Chimney Repointing in Faversham , Kent

The clearest signs are visible gaps in the mortar joints, loose bricks, or white salt deposits on the exterior brickwork. Inside, you might see damp patches on the walls or ceiling around the chimney breast, or find grit and debris falling into your fireplace. If you notice any of these, it’s best to get it looked at before the winter gales arrive.

If you live in a period property or a conservation area in Whitstable or Broadstairs, lime mortar is often essential. Unlike modern cement, lime is flexible and breathable, which protects older, softer bricks from cracking. Using the wrong materials on a historic chimney can cause permanent damage, so we always match the mortar to your home’s specific needs.

Small repair jobs and minor repointing typically start from around £150 to £200, but the total cost depends on the size of the stack and the ease of access. Some chimneys require scaffolding to reach safely, especially on multi-storey Victorian villas in Margate or Ramsgate. We provide a clear, no-obligation quote after a site visit so you know exactly what to expect.

Yes. If a coastal gale has shifted your chimney pot or caused masonry to fall, we offer 24/7 emergency roof repairs. We can quickly attend your property to make the stack safe and prevent water ingress. Emergency call-outs across Whitstable and Thanet start from £95.

You should look for physical signs of wear from the ground using binoculars or from a safe distance. If you see white powdery deposits on the bricks, deep gaps where the mortar used to be, or pieces of mortar sitting in your gutters, the stack is degrading. Inside the house, damp patches on the chimney breast or a musty smell in the loft are clear indicators that water is getting through the external masonry.

Yes, coastal chimneys deteriorate faster than those inland. The salt crystallises inside the pores of the mortar and brickwork, expanding and causing the material to break apart. This is why we often see chimney stacks in Whitstable and Margate needing repointing decades sooner than properties further into Kent. Regular maintenance is essential to prevent the stack from becoming structurally unsound.

Most homes built before the mid-20th century were constructed using lime mortar. It is flexible and breathable. If you use a hard cement mortar to repoint an old lime-built chimney, the cement won't move with the building, leading to cracks and "spalling," where the face of the brick pops off. We assess your property’s age and existing materials to ensure we use the correct mix for a long-lasting repair.

Costs vary depending on the height of the stack and the extent of the damage. Minor mortar repairs or replacing a few bricks can start from around £150-£200, subject to a site inspection. If scaffolding is required for high-level access or if the lead flashing needs a full replacement, we will provide a detailed quote before any work begins.

In most cases, like-for-like repairs and repointing do not require planning permission. However, if your property is listed or located in a conservation area—such as those in Broadstairs or central Whitstable—there may be restrictions on changing the height of the chimney or the materials used. We can advise you on matching existing materials to stay compliant with local Canterbury or Thanet district guidelines.

A standard chimney stack on a residential home can usually be repointed within one to two days, depending on the weather. We always monitor the forecast, as mortar needs dry conditions to set properly. If we are also replacing lead flashing or flaunching, we manage the timeline to ensure the stack is never left vulnerable to rain overnight.

Often, we find chimney issues while carrying out gutter cleaning or minor roof repairs. If we spot a loose pot or failing mortar while on your roof, we will take photos to show you exactly what the problem is. We can then provide a combined quote to fix the chimney while we already have the access equipment in place, saving you money on future call-out fees.